ELNA ENVISION LINE UP!

* Elna CE-20*

*Elna Envision 8007*

*Elna 6005 Heirloom Edition*

*Elna 6004*

*Elna 6003/6003Q*

*Elna 3007*

*Elna 3005*

*Elna 3003*

*Elna Funstyler*

*Elna 2006*

*Elna 2004 SP*

*Elna 2004*

*Elna 2002*

*Elna 1010*

*Elna Envision Scan PC*

*Elna DreamVision*

*Elna Envision Cards*

RETURN TO OK SEWING HOME PAGE

THE ELNA OVERLOCK LINEUP!

*Elna 945!*

*Elna 704!*

*Elna 644!*

*Elna 634!*

*Elna ProCards!*

THE ELNA PRESSES & STEAMERS LINEUP!

*Elnapress Geneve 2000!*

*Elna Alize!*

*Elna 340!*

*Elna 181S!*

*Elna 171S!

NEW! - Elna Project - "Onesies"

RETURN TO ELNA HOME PAGE

**************************************************

OK Sewing & Vacuum Center
is a fully authorized dealer of The Elna Corporation

THE ELNA OVERLOCK 644!

photo of 644
The Elna 644!

The Elna 644
comes equipped with practical features to handle your construction needs. This 4/3/2 thread overlock comes with a differential feed with 4 positions from 0.5 to 2.0. Threading couldn't be easier, considering that a threading chart located inside the front door leads you through the thread guides and loopers. The exclusive Elna tilt needle clamp makes threading or changing needles easy as can be since it enhances your view of the needle clamp system.

Program Names:
* 4-thread overlock with safety stitch/stretch knit.
* 3-thread.
* 3-thread wide.
* Flatlock 3.
* Flatlock 2.
* 3-thread narrow hem.
* 3-thread rolled hem.
* 2-thread rolled hem.
* Stretch wrapped.
* Overcast 2.

Technical data:
* Exclusive tilt needle clamp for easy changing and threading of needles.
* Needle clamp safety device.
* Front door safety device.
* Stitch length control lever located on the front for easy access.
* Stitch length setting 0.5 to 4.0 mm.

 * Tension release.
* Differential feed with 4 positions 0.5 to 2.0 mm.
* Adjustable cutting width with a maximum of 7mm.
* Two thread converter.
* Instant rolled hem lever.
* Stitch reference cards.
* Decorative sewing with specialty threads.
* Elastic application.
* Optional blindhem application.
* 3-thread pintuck application.
* Threading chart located inside front door.
* Presser foot adjustment knob located on the upper left section of machine.
* Movable and stationary blade system - blade can be locked or disengaged.
* Maximum speed of 1300 r.p.m.
* Snap on feet.
* Impressive selection of optional serger feet.
* Electronic foot control.
* Telescopic thread antenna system.
* Optional waste tray.

photo of logo

Go to the Elna product information page!
Go back to OK Sewing & Vacuum Home Page!
go to TOP of page.